EcoFlow 110W, User Manual

4. Panel Shading.

 The surface of the solar panel should not be shaded during use. Shading caused by 

    shadows, foreign objects and glass can all greatly reduce power output.

What should I know about the operating temperature, storage and use of the 110W Solar 
Panel?

The operating temperature of the Solar Panel is -20°C–85°C (-4°F–185°F). The panel should be
folded into its original shape and stored in its Protective Case (Kickstand), which provides sufficient
protection for the product. To extend the service life of the panel, ensure that the product is not exposed to
external forces/impacts when not in use. 

The solar panel must not be dropped, pierced, bent, or sat on. 

These actions may break the cell and render the panel unusable. Any such damage will not be covered by 
the free warranty.

Performance Issues Caused by Malfunctioning Panels: 

If the panel still isn’t generating power or its output 

remains far below expected nominal power figures after addressing the issues above, there may be an issue 
with the panel itself. Please contact Customer Support for assistance.

FAQs

Does the 110W Solar Panel generate a full 110W of power?

In most cases, it is normal for a solar panel not to deliver its full nominal power. Some of the reasons why 
this happens, as well as some suggestions for getting closer to the nominal power figure, are given below.

1. Light Intensity.

 The amount of light shining on the panel will result in fluctuations to the power output.  

   You are more likely to achieve nominal power output figures closer to those obtained under test conditions   
   when using the product on a clear day during the midday sun, than when using the product in the morning 
   or later in the afternoon. Weather conditions will also affect the amount of sunlight that shines on the 
   panel. For example, you are much less likely to achieve the figures for nominal power in hazy, cloudy or 
   rainy conditions.

2. Surface Temperature.

 The temperature of the solar panel surface will also affect the amount of power    

    generated. The lower the surface temperature of the panel, the more power will be produced. For 
    example, solar panels generate more power when used during the winter than during the summer, and 
    this is completely normal. Solar panels generally reach temperatures close to 60°C (140°F) during 
    summer. This reduces nominal power by 13%, despite the higher levels of light shining on the panel.

3. Sunlight Angle.

 In optimal light conditions, the sun’s rays should remain perpendicular to the surface 

    of the panel for best performance. The difference of ±

10 degrees of 90 degrees of sunlight hitting the   

    panels has little effect on the power.

How much power can the 110W Solar Panel generate under normal conditions?

This depends first and foremost on weather conditions. Generally speaking, on a clear day with no clouds in 
the sky, sunlight hitting the panel at a 90° angle usually generates 80W–90W of power in the 110W panel. 

(Current light conditions are normally 800W–900W/m

²

 (74.3W–83.6W/ft

²

) with a panel temperature of 50°C (122°F) 

under test conditions. Nominal power ratings are based on 1000W/m

²

 (92.9W/ft

²

) in AM1.5 conditions with a panel 

temperature of 25°C (77°F) under test conditions. Power output figures close nominal values were normally observed in 
the midday sun during the winter.)