The unit does not start
Check that the power supply is connected.
Check that there is power in the outlet socket.
Call a service technician.
Unit indicates always low level or
empty can
Make sure chemistry can is full.
Check if contacts at the bottom of the lance is not blocked.
They should be able to move freely up and down.
Call a service technician.
No chemistry comes out of the
nozzle
Make sure chemistry can is full.
Check if pressurized air connected.
Check if you can hear the relay activate when the spray time is starting.
Make sure nothing is blocking the tube.
Try to hold a finger in front of the nozzle to block the nozzle, this can in
some situations rinse the nozzle.
Call a service technician.
The chemistry usage of the unit is
not correct
Call a service technician.
8. Trouble shooting
11
Summary of Contents for DS1-RMT
