A single pole main switch should be
installed close to the Airspexx unit
to make servicing the unit easier.
1. Security Advice
Read and understand this instruc
-
tion sheet prior to installation and
set-up of the unit.
Observe personal protection in
regard of chemical products dur
-
ing refilling procedures (product
replacement), maintenance and
repair. Read product label and
MSDS sheet.
Contact Ecolab for MSDS sheet.
2. Description
The Airspexx DS is a unit for dis
-
pensing using an Airspexx disinfect
-
ant.
Airspexx is spread in the room like
aerosoles through an air nozzle.
The unit is available both mounted
on the wall and as a mobile unit.
It consists of an air nozzle, a
controller and a suction lance with
adapter for a 20L can. Airspexx
DS1 is mounted on a trolley. Air
-
spexx DS2 is mounted on the wall
or on a hand hold frame.
The standard output setting of the
unit is 200 ml/hour (using 2 bar air
pressure). The intended use is with
this standard setting. Adjustment of
nozzle is only allowed by authorised
personnel.
The controller consists of a display
for setting the Airspexx features
incl. program times, an air valve
with regulator which ensures the
required air pressure and finally a
pcb board which is the power sup
-
ply to the display and air valve and
connection of suction lance.
EN
3. Location
The Airspexx must be placed in a
frost-free room only.
To ease the operation, leave as
much free space as possible
around the unit.
4. Air
The Airspexx unit requires an
external air supply, the following
requirements must be met:
-Pressure (dynamic): >3 Bar
-Consumption: <40 l/min
-Connection: Euro quick coupling
nippel compatible with SWL 520
series.
110002990C
Safety instructions
Only authorized customer service
provider or qualified
personnel shall under
-
take to execute main-
tenance work. They
have to be familiar with all appli
-
cable safety regulations.
Always disconnect from power
supply before opening machine.
.
5. Power supply
9
Summary of Contents for DS1-RMT
