417101634_Lubo-DryExx_Advanced
- 44 -
Rev. 07-01.15
7.3.4.1.1.1
Parameter display: Change Valve- and Booster-times
fig. 7.12
The picture shows the following items:
Circuit and area number (area)
Total valve number of the system
Pulse- and break-time (default and actual)
Actual state of „Booster“
Actual state of release
Change the Valve-times:
Press Button "Valve Times"
Change the Booster-times:
Press Button "Booster Times"
Leave the picture:
Press Button “Return”
OR
•
To go to the ‘Start’ screen:
Press "
"
After leaving the picture with button „Return“ you see again the Parameter - „circuit selection”.
7.3.4.1.1.2
Parameter display: Change Value Valve-times
fig. 7.13
The picture shows the following items:
Circuit and area number (area)
Total valve number of the system
Pulse- and break-time (default)
Change parameters:
Press Values and input value (Password)
Leave the picture:
Press Button “Return”
OR
•
To go to the ‘Start’ screen:
Press "
"
After leaving the picture with button „Return“ you see again the Parameter - „Valve and Booster-
times”.
