417101634_Lubo-DryExx_Advanced
- 45 -
Rev. 07-01.15
7.3.4.1.1.3
Parameter display: Change Separate Booster-function
fig. 7.14
The picture shows the following items:
Circuit and area number (area)
Total valve number of the system
Waiting time for activation (default and actual)
The time until the Booster-funktion will be
activated
This time is running, if the release signal is off
•
Active time (default and actual)
The time how long the Booster-function is active
if finished the normal pulse- and break- time will
be used
•
Actual status „Activation“
This signal will be active if the time „After“ is
running down
•
Pulse- and break time (default)
This times are used if:
1. The waiting time „After“ is down
2. The release signal is „ON“
3. The active time „For“ ist running
Information:
•
This function is „ON“ if both times „After“ and „For“
are more than „0“
•
This function is „OFF“ if both times „After“ and „For“
are „0“
Change parameters:
Press Values and input value (Password)
Leave the picture:
Press Button “Return”
OR
•
To go to the ‘Start’ screen:
Press "
"
After leaving the picture with button „Return“ you see again the Parameter - „Valve and Booster-
times”.
7.3.5 Messages
fig. 7.15
To go to the “Messages”
Press "Message"
