Transport and storage
30
Portable Lamp
S
HL 200-Ex
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
6
Transport and storage
6.1
General
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
6.2
Batteries
• Do not transport together with other materials!
• Handle with care!
• Store protected from fire, sources of dust, harmful gases and liquids!
• Store in a dry and cool location!
Charging current
Charging time
approx. 11 h
Function
Charging starts upon inserting the portable lamp into the charging unit -
with voltage display via green LED
Automatic break
device
In motor vehicle operation, the car battery voltage is monitored. If the voltage
of the car battery drops below 11.7 V and 23.5 V with a 12 V and 24 V battery,
respectively, the charging process of the portable lamp will be interrupted
automatically.
The automatic break device can be deactivated.
Protection class
II (with protective insulation)
Enclosure material
polyamide, impact-resistant, black
Mounting
wall or table mounting
Connection cables
charging cable 110 ... 240 V AC: approx. 1.8 m long, with Europlug, 2-pin
charging cable 12 ... 30 V DC: approx. 1.8 m long, with free ends, 2-pin
Note
Ex operation
Attention!
The charging units are not suitable for use in hazardous areas!
Charging units must always be mounted in NON-Ex areas!
Technical Data
at room temperature:
charging process
stand by
12 V DC
24 V DC
110 V AC
240 V AC
max. 170 mA
max. 120 mA
max. 90 mA
max. 60 mA
power consumption < 1 W
