Disposal
4
3
Portable Lamp
S
HL 200-Ex
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
• Connect the red connection line "+" (2) to the battery contact marked in red "+".
• Connect the blue connection line "-" (2) to the battery contact marked in blue "-".
• Connect the connection line (A1) to the charging contact (B1).
• Connect the connection line (A2) to the charging contact (B2).
• Place the lamp head on the enclosure.
• Fasten the lamp head to the enclosure with the screws (1) - tightening torque 0.5 Nm.
• Insert portable lamp briefly into charging unit.
10.1.2 Cleaning
• Clean the device only with a damp cloth.
• Use water or mild cleaning agents.
• Do not use abrasive, scratching and aggressive detergents or solvents.
10.2 Repair
10.3 Returning the device
Use the "Service form" to return the device when repair/service is required. On the
internet site "www.
ecom
-ex.com" under "Downloads > Customer service":
• Download the service form and fill it out.
• Send the device along with the service form in the original packaging to
ecom instruments
GmbH.
11
Disposal
• Observe national and local regulations and statutory regulation regarding disposal.
• Separate materials when sending it for recycling.
• Ensure environmentally friendly disposal of all components according to the statutory
regulations.
NOTICE
Wrong connection of the connection lines will damage the portable lamp.
DANGER
Danger due to improper maintenance/repair!
Explosion protection is impaired!
• Repair work on the device must be performed only by
ecom instruments
GmbH.
CAUTION
Danger due to chemical reactions!
Human health and the environment are at risk!
Batteries
• collect them separately
• dispose of them in controlled fashion
• do not dispose of them in the domestic waste
• return them to public collection points or to the supplier
