- 15 -
4.
Press the SET/HOLD button to confirm.
(3) Setting the Local Area Code
1.
Press SET/HOLD button, the LCD display: “-0123456-”
2.
Press the number key 3 again, the LCD display: “ArEA - - - - -”
3.
Then press Number Key directly to set the Local Area Code.
To change preset Local Area Code, you could press #/= once to delete the preset
local area code. Then input new Area Code.
4. Press
SET/HOLD
button
again
to complete the setting.
3.
For example, if need to set the local area code “0755”, press Number Key “0755”
directly when LCD displayed “ArEA - - - - -”.
4.
To change the preset Local Area Code, when the LCD display
“ArEA 0755”, you could press #/= once to delete the preset local
area code. Then press Number Key to set the new Local Area Code.
(4) Setting the FLASH time
1. Press SET/HOLD button once, the LCD display: “-0123456-”
2.
Press the number key “4” again, the LCD display “ FLASH 6 0 0 ”
3. Press UP/
＋
or DOWN/
－
button to select FLASH time:
FLASH
1000
-
The
FLASH time will be 1000 ms
FLASH 600
-
The FLASH time will be 600 ms
………………..
FLASH 90
-
The FLASH time will be 90 ms
4. Press SET/HOLD button again to complete the setting.
(5) Setting the Alarm Clock
1.
Press SET/HOLD button once, the LCD display: “-0123456-”
2.
Press the number key 5 again, the LCD display: “ AL 123”.
( that means there are 3 groups alarm clock selectable.)
3.
Press number key 1 to enter the first alarm clock setting, LCD will display “AL 1
OFF”,
- 16 -
4.
Press the */. button to select the ON/OFF state. LCD will display
“AL 1 12-00” and “12-00” will flash after selected the ON state, and then press
Number Key to set the alarm time (for example, press “1300”, that means the Alarm
Clock time is preset at 1:00 a.m.).
5.
Press the SET/HOLD button to confirm after finished. LCD will display “AL 123”
again; set the second & the third alarm clock as above steps.
After setting the alarm clock, the phone will make alarm sound at the preset time, you
could press any key to stop the alarm.
(6) Setting the Long-Distance Code
1.
Press SET/HOLD button, the LCD display: “-0123456-”
2.
Press the number key 6 again, the LCD display: “LCOdE - - - - -”
3.
Then press Number Key directly to set the Long-Distance Code.
To change preset Long-Distance Code, you could press #/= once to delete the
preset long-distance code. Then input new Code.
4.
Press SET/HOLD button again to complete the setting.
After set-up of the Long-distance Code, press UP/+ or DOWN/- button
to review the desired Caller ID memory, then press BACK button twice,
this phone will add the Long-Distance Code in front of the desired
memory and dial out.
(7) Selecting the Dialing Mode – Tone / Pulse
z
Put the Tone/Pulse Switch at the position “Tone”
z
If you can not dial, put the Tone/Pulse Switch at the Position “Pulse”
(8) Setting the Ringer Volume
You can select the Ringer Volume Hi/Low by setting the Ringer Volume switch on the right
side of this unit.
(9) Setting the Hands-free Speakerphone Volume
You can select the Hands-free speakerphone Volume Hi-Low by setting the Hands-free
Volume switch on the right side of this unit.
