15
16
https://www.altonindustries.com
7
14
2
SAVE THESE INSTRUCTIONS
BATTERY & CHARGER
FUNCTIONAL DESCRIPTION
CAUTION!
Always be sure that the tool is switched off and the battery
pack is removed before adjusting or checking function on the tool.
Installing or removing battery pack
CAUTION!
Always switch off the tool before installing or removing of
the battery pac.
CAUTION! Hold the tool and the battery pack firmly when installing or
removing battery pack. Failure to hold the tool and the battery pack
firmly may cause them to slip off our hands and result in damage to the
tool and battery pack and a personal injury.
1
2
Top handle
Switch trigger
3
Lock-off lever
4
Machinebody
5
Oi tankcap
6
Front
handle
Front hand guard/chainbrake
Battery pack
Oil tank
10
Chain cover
11
Chain tensioningrequlator
12
Guide bar plate compression twist
13
Guide bar
Saw chain
Button
Battery pack
1
To install the battery pack align the tone on the battery pack with the
groove in the housing and slip it into place. Insert it all the way until it
locks in place with a little click.
2
To remove the battery pack, slide it from the tool while sliding the
button on the front of the pack.
CAUTION!
Always install the battery pack fully until you hear a click. If
not, it may accidentally fall out of the tool, causing injury to you or
someone around you.
CAUTION!
Do not install the battery pack forcibly. If the pack does not
slide in easily, it is not being inserted correctly.
1 2 3 4
5
6
7
8
9
10 11 12
13
14
1
2
8
9
1
