25
26
https://www.altonindustries.com
NOTICE:
When filling the chain oil for the first time, or refilling the tank after
it has been completely emptied, add oil up to the bottom edge of the filler
neck. The oil delivery may otherwise be impaired.
NOTICE:
Never use oil including dust and particles or volatile oil.
NOTICE:
When pruning trees, use botanical oil. Mineral oil may harm trees.
NOTICE:
Before the cutting operation, make sure that the provided oil tank
cap is screwed in place.
WORKING WITH THE CHAIN SAW
CAUTION:
The first time user should, as a minimum practice, do cutting
logs on a saw-horse or cradle.
CAUTION:
When sawing precut timber, use a safe support (saw horse or
cradle).Do not steady the workpiece with your foot, and do not allow
anyone else to hold or steady it.
CAUTION:
Secure round pieces against rotation.
CAUTION:
Keep all parts of the body away from the saw chain when the
motor is operating.
CAUTION:
Hold the chain saw firmly with both hands when the motor is
running.
CAUTION:
Do not overreach. Keep proper footing and balance at all
times.
NOTICE: Never toss or drop the tool.
NOTICE: Do not cover the vents of the tool.
PRUNING TREES
Bring the chain saw body into contact with the branch to be cut before
switching on. Otherwise it may cause the guide bar to wobble, resulting in
injury to operator. Saw the wood to be cut by just moving it down by using
the weight of the chain saw.
lf you cannot cut the timber right through with a single stroke:
Apply light pressure to the handle and continue sawing and draw the chain
saw back a little.
When cutting thick branches, first make a shallow undercut and then make
the finish cut from the top.
