01
02
https://www.altonindustries.com
SPECIFICATIONS
Model
ELG05
Overall length (Without guide bar)
450mm
Rated voltage
D.C.18V
Net weight
3.7k
Standard guide bar length
250mm
Saw chain type
25AP
Standard sprocket
Number of teeth
6
Pitch
3/8
Chain speed
6+-10%m/s
Chain oil tank volume
140cm
3
Due to our continuing program of research and development, the
specifications herein are subject to change without notice.
Specifications and battery pack may differ from country to country.
THE RECOMMENDED AMBIENT TEMPERATURE RANGE:
Number of drive links
45
Guide bar
Guide bar length
300mm
Cutting length
300mm
Pitch
318”
Gauge
1.3mm
Sprocket
Number of teeth
6
Pitch
318”
SYMBOLS
The following show the symbols used for the equipment. Be sure that you
understand their meaning before use.
Read instruction
manual.
Wear safety glasses.
Wear ear protection.
Wear a helmet,
goggles and ear
protection.
Use appropriate
protection for foot-leg
and hand-arm.
This saw is to be used
by properly trained
operators only.
Do not expose to
moisture.
Maximum permissible
cut length.
Always use two hands
when operating the
chain saw.
Direction of chain
travel.
Saw chain oil
adjustment.
Precautions that
involve your safety.
DANGER! Be careful
with kickbacks.
Keep all bystanders at
least 15m (50 feet)
away.
INTENDED USE
The tool is intended for cutting branches and pruning trees. It is also suitable
for tree service.
NOISE
The typical A-weighted noise level determined according to IEC62841-4-1:
Sound pressure level( LpA): 80.5 dB(A)
Sound power level(LWA): 95 dB(A)
Uncertainty(K): 3 dB(A)
WARNING!
Wear ear protection.
VIBRATION
The vibration total value(tri-axial vector sum)deter mined according to
IEC62841-4-1: Work mode: cutting wood
Vibration emission(ah w): 5.541 m/s2(Front handle), 6.843 m/s2(Rear handle)
Uncertainty(K): 1.5 m/s2
