ZincBlue2 User Manual | 68
• To download a copy of the system log, click on the Export button.
• To view the waveform at the time an event occurred, if available, select that event row and click on the View
Waveform button that appears to the right of the system id column.
Below is a table outlining all possible events recorded by the ZincBlue2:
Category Log Message
Less than 10% of Battery Capacity
Power Resume
Power Fail, VRMS Low
Power Fail, VRMS High
Power Fail, AC Off
Power Fail, Frequency
Power Fail, Enhanced
Firmware Update Fail
Inverter Out of Specification
AC Wiring Error
Controller Temperature out of specification
Inverter Locked out
Excessive Load
System Shutdown
Battery Charger Firmware Updated
System Config Change: Time Format
System Config Change: Date Format
System Config Change: Date
System Config Change: Time
System Config Change: Power Low Threshold
System Config Change: Power High Threshold
System Config Change: Power Sensitivity
System Config Change: Line Qualify Time
System Config Change: Daylight Savings Time On/Off
System Config Change: Change/Delete Event
System Config Change: Tilt Enable/Disable
Config Change NTP
Network Config Change
Time Zone Config Change
System Name Config Change
Battery Attention (XRT Only)
Fault
Info
Power Fail
Error
List of Event Types
Summary of Contents for ZincBlue2 UPS 1000W
Page 1: ...ZincBlue2 Manual...
Page 90: ...87 ZincBlue2 User Manual Notes...