Vertex
Solar™ Pool & Spa Heating System
-- Installation & User Manual
© Copyright 2021 Optex Solar Pty Ltd. All rights strictly reserved.
Page 6
3
Warranties
EcoOnline™ offers the following Warranties
•
20 year return to base Warranty on all MOTECH cell solar PV panels
•
5 year return to base limited Warranty on all Vertex system HDPE collectors
•
1 year return to base limited Warranty on all Vertex system pumps
See our Terms and Conditions page for further details:
www.EcoOnline.com.au/terms-and-conditions
4
System Sizing Guarantee
Sizing systems is difficult involving a lot of factors which we could get wrong. Hence in addition to the above
Warranties EcoOnline offers a System Sizing Guarantee as follows. If we sized your system (or you use our online
calculator)
and you took our advice and you aren’t happy with the systems performance (heat output), then you can
purchase
up to 25% more
panels originally supplied by EcoOnline
up to two years
after your original purchase and
we will ship the items
free of shipping charges
.
The Vertex System is not self-priming and requires the installation of the pump outside
of but
below
the waterline of your pool/spa.
Customer please note:
Collector warranty is VOID
if collectors are installed:
•
without a
vacuum release valve
on the inlet line,
•
or
in a manner that prevents collector from fully draining
when the pump stops.
Such installations will expose the collectors to strong fatiguing positive/negative pressures,
and/or stagnant hot chlorinated water on hot days. These situations will have detrimental
effects on the collectors which will limit lifetimes and can also result in significant
shrinkage of the collectors which would put strain on roof attachments means.
Pump
warranty is VOID
if pumps are installed:
•
with a pump height greater than 3.5m (per pump for dual pumps)
•
or
installed above the waterline
or without the
protective bypass line
,
•
or with
inappropriately sloped or non air tight suction line,
•
or with the suction line
tee’d into the mains pump filter line without independent
suction ports installed,
•
or
without the Vertex strainer.
The Vertex System requires the installation of an independent suction line;
Teeing into
the mains pump filter circuit is not allowed
.
