16
Customizing Features / Options
3
. Use the
p
UP or
q
DOWN buttons to change
between “12 hr” and “24 hr”.
4
. When the desired setting appears in the display,
press the SELECT button three times to return to
the normal run (time of day) screen.
ADJUSTABLE BACKWASH
If your incoming water supply has higher sediments
or clear water iron, a longer Backwash and/or Fast
Rinse time may help in keeping the unit cleaner.
To change the length of the Backwash:
1
. Press and hold the SELECT button until the screen
in Figure 24 is displayed.
2
. Press the SELECT button five times, so that “SET
TIME bA” appears in the display (See Figure 31).
3
. Press the
p
UP or
q
DOWN buttons to set the
length of Backwash in minutes.*
4
. When the desired Backwash time appears in the
display, press the SELECT button twice to return to
the normal run (time of day) screen.
* Setting backwash and/or fast rinse times too low
may result in salty tasting water after regeneration.
FIG. 31
3
. Use the
p
UP or
q
DOWN buttons to set the length
of the clean time in minutes.
4
. When the desired clean time appears in the dis-
play, press the SELECT button four times to return
to the normal run (time of day) screen.
12 OR 24 HOUR CLOCK
All time displays are shown in standard clock time
(1 to 12 AM; and 1 to 12 PM) at the “12 hr” default
setting.
To change this setting:
1
. Press and hold the SELECT button until the screen
in Figure 24 is displayed.
2
. Press the SELECT button four times, so that “12
hr” or “24 hr” flashes in the display (See Figure 30).
FIG. 30
FIG. 32
Top
Distributor
Cleansing Screen
Resin
Tank
FIG. 33
ADJUSTABLE FAST RINSE
To change the length of the Fast Rinse:
1
. Press and hold the SELECT button until the screen
in Figure 27 is displayed.
2
. Press the SELECT button six times, so that “SET
TIME Fr” appears in the display (See Figure 32).
3
. Press the
p
UP or
q
DOWN buttons to set the
length of Fast Rinse in minutes.*
4
. When the desired Fast Rinse time appears in the
display, press the SELECT button once to return to
the normal run (time of day) screen.
CLEANSING FEATURE
The cleansing feature keeps larger particles of sedi-
ment from entering the home’s plumbing system. As
water passes through the softener, the larger sedi-
ment particles are collected in the integrated basket
and then rinsed to the drain before each regenera-
tion. The cleansing feature provides added protection
for water using appliances by reducing the chance of
larger particles entering the various products valves
and screens. The “Clean Feature” may be turned ON
to provide an extra backwash that will help keep the
cleansing screen clean. The default is OFF.
IMPORTANT:
The cleansing feature is not intended to
replace pretreatment filtration. For
problem water applications, additional
sediment filtration is recommended.
