10
eCopy ScanStand Assembly Instructions
5.1
Raise keyboard bracket to position shown. You
may need to loosen the lower bracket tension
screw first using the Allen key.
5.2
Remove Allen screws (2) from underside of
keyboard bracket and set screws aside. Do not
remove the tension screws.
5.3
Slide tongue at rear of keyboard into keyboard
bracket, aligning the screw holes.
5.4
Insert screws through back plate and into
threaded holes in keyboard bracket. Tighten
securely.
5.5
Flip keyboard down to horizontal position.
Bracket tension
screw
Step 5: Keyboard attachment
