Chapter 2: Operation
The eCorder Faraday Z1 interface consists of one physical Power Switch, two physical buttons
(Reset and Recal), and a number of touch-sensitive buttons and sliders. The touch-sensitive buttons
use Haptic Feedback to confirm actuation. LEDs are used to indicate selections and modes.
The Mouthpiece is removable and should be be taken off after playing (and periodically during
playing to shake out excess condensation) to allow the unit to dry.
We recommend using the stand any time a cable is plugged in. If the eCorder is rested on its side
or upside down, on rare occasions, after heavy playing, water may be drip down the bottom and may
enter the unit and temporarily disrupt normal operation. It’s recommended to keep the top side up and
to periodically remove the mouthpiece and wipe things dry with a soft cloth. Make sure not to allow
water to enter the Pressure Sensor Tube when the mouthpiece is removed.
