Range 14
– A1T
Operating instructions
ECOSAFE | Date du document : 19/06/2019 – Version : 01
2
1. DESCRIPTION / USE
The chemicals have to be stored in safety cabinets. These safety cabinets allow storing either flammable products, acids, bases or
toxics (low dangerous).
2. TECHNICAL FEATURES
Compliance :
▪
Compliance with INRS recommandations
▪
Compliance with the articles R. 5132-66 and R. 5132-68 of the Public Health Code
▪
Strandardized pictograms compliant with the standards ISO 3864, ISO 7010, NF X8.003 and the directive 92/58/CEE
Technical features :
▪
Construction in 10/10th steel
▪
White epoxy paint RAL 9010
▪
Standardized pictograms provided 1x « flammables », 2x « corrosives » and 1x « toxics »
▪
Manual doors
▪
Locking system
▪
Shelves adjustable in height, every 100 mm
▪
Air inlet and outlet
▪
External dimensions : H 1825 x W 560 x D 545 mm
▪
Storage capacity : 120 liters
▪
Retention capacity : 20 liters
▪
Loading capacity : 50 KG per shelf
▪
Weight : 80 KG
3. INSTALLATION AND COMMISSIONING
Installation
The safety cabinet has to be installed on a flat surface that can bear its weight with the products inside.
Ensure that the safety cabinet is correctly wedged, as for the cabinet not to topple. The eventual blocking has to be done by the user.
The correct leveling of the cabinet must cart off any distortion of the frame, allow the doors to be strictly parallel compared to the frame,
and take away any rubbing of the doors on the cabinet’s frame.
The installation location must guarantee :
▪
That it is not exposed to any heat source
▪
That it is protected against moisture and that the ambient temperature of the location is neither less than 5°C, nor more than
40°C
Transport and handling
The safety cabinet that you received has been protected and transported in optimal conditions, as to be protected from any damage.
