Engl
ish
© 2016 EcoSeb, Inc. 4 All rights reserved
QUICK START UP
STEP 1 - WHERE TO POSITION YOUR
DEHUMIDIFIER?
Ensure the unit is a safe distance away from a
wall or furniture, away from direct sunlight.
TIP:
Position the dehumidifier in the dampest
room or somewhere central like a landing or a
hallway. As long as the internal doors are open
the excess moisture from all of the rooms in
the house will migrate naturally towards the
dehumidifier and be processed.
STEP 2 - CAUTION - AVOID USING IN
Small confined area i.e. broom cupboard,
boiler room, unventilated rooms etc.
Close proximity to a heat source such as
heater, tumble dryer, cooker.
Dusty or building sites or an industrial
environment where particles can clog up the
filter or internal components. This will cause
the unit to malfunction, voiding your
guarantee.
STEP 3 - ON/OFF
TO
OPERATE
UNIT
Place the unit in an upright
position on an even level surface.
Plug the unit into the mains
socket.
Turn the humidity stat dial
clockwise to select desired
mode. (Power ON indicator
lights up)
Turn anti-clockwise to switch the
unit OFF.
STEP 4 - DRY/LAUNDRY MODE
Low
Select to keep the room at a
comfortable level
Dries the air to approximately
70% RH and stops dehumidifying.
Medium
Select to run in Medium mode
Dries the air to approximately
50% RH and stops dehumidifying.
Important:
Once you reach desired
RH, switch from MEDIUM to LOW
for energy savings.
High
Select High mode to quickly control
high levels of humidity
Dries the air to approximately
40% RH and stops dehumidifying
.
Important:
Once you reach desired
RH, switch from HIGH to MEDIUM
for energy savings.
Laundry
Use for drying clothes. The
dehumidifier will continuously dry
the air until the settings are
changed manually. It typically
takes 2 – 4 hours to dry your
laundry.
