www.ecosmartfire.com
ENGLISH
Single Sided
Installation
Equipment required: Power Drill, Screwdriver, Level, Hand Trowel for
Plaster, Silicone Gun, Caulk Gun
1. Construct the main wall framework with the opening size shown in
Table A. The base of the frame can be a solid bench/platform, which
will assist in leveling up the appliance when in position.
Table A: Framework Opening Sizes
Physical appliance dimensions should be verified against cut out dimensions BEFORE
installation begins to confirm tolerances align.
APPLIANCE
W
mm [in]
D
mm [in]
H
mm [in]
Weight*
kg [lbs]
FLEX18SS
488 [19.2]
365
[14.4]
730 [28.7]
25.7 [56.5]
FLEX32SS
922 [36.3]
365
[14.4]
730 [28.7]
45.7 [100.5]
FLEX42SS
1177 [46.3]
365
[14.4]
730 [28.7]
60 [131.9]
FLEX50SS
1380 [54.3]
365
[14.4]
730 [28.7]
71.4 [157.1]
FLEX50SS.BX
1380 [54.3]
365
[14.4]
730 [28.7]
69.9 [153.8]
FLEX60SS.BX
1634 [64.3]
365
[14.4]
730 [28.7]
83.9 [184.6]
FLEX68SS
1840 [72.4]
365
[14.4]
730 [28.7]
97.1 [213.6]
FLEX68SS.BX
1840 [72.4]
365
[14.4]
730 [28.7]
95.1[209.2]
FLEX68SS.BX2
1840 [72.4]
365
[14.4]
730 [28.7]
93.9 [206.7]
FLEX78SS.BX2
2090 [82.3]
365
[14.4]
730 [28.7] 107.8 [237.1]
FLEX86SS
2300 [90.5]
365
[14.4]
730 [28.7] 121.5 [267.3]
FLEX86SS.BX
2300 [90.5]
365
[14.4]
730 [28.7] 119.4 [262.7]
FLEX86SS.BX2
2300 [90.5]
365
[14.4]
730 [28.7] 118.8 [261.4]
FLEX104SS
2760 [108.7] 365
[14.4]
730 [28.7] 146.2 [321.6]
FLEX104SS.BX
2760 [108.7] 365
[14.4]
730 [28.7] 145.2 [319.4]
FLEX104SS.BX2 2760 [108.7] 365
[14.4]
730 [28.7]
193.8 [426.4
]
FLEX122SS
3220 [126.7] 365
[14.4]
730 [28.7] 171.5 [377.3]
FLEX122SS.BX
3220 [126.7] 365
[14.4]
730 [28.7] 170.1 [374.2]
FLEX122SS.BX2 3220 [126.7] 365
[14.4]
730 [28.7] 168.9 [371.6]
FLEX140SS.BX
3680 [144.9] 365
[14.4]
730 [28.7] 195.2 [429.4]
FLEX140SS.BX2 3680 [144.9] 365
[14.4]
730 [28.7] 193.8 [426.4]
FLEX158SS
4140 [163]
365
[14.4]
730 [28.7] 222.1 [488.6]
FLEX158SS.BX2
4140 [163]
365
[14.4]
730 [28.7] 218.9 [481.6]
* Appliance weight includes burner/s (dry weight excluding fuel), glass charcoal and glass. It
does NOT include glass charcoal for side boxes.
IMPORTANT: The framing above the appliance must be self-
supporting. The appliance is not load-bearing.
2. Slide the appliance inside the framing cavity (the base of the
appliance can sit directly on top of the 2 x 4 framing material). The
appliance is shipped with red stability bracket(s) installed on the open
side(s) to keep the appliance square while in transport and during
installation. Keep the bracket(s) on while framing up the setting to
assist in minimizing movement of the appliance.
3. Secure the appliance to the framework with screws using the
existing mounting holes on the appliance flanges. Make sure that the
appliance is level before securing it in place.
4. Remove the red stability brackets.
