© Copyright 2004 - 2018 The Fire Company Pty Ltd. All rights reserved. V0318
BK Series
AB Series
VB Series
XL Series
INSTALLATION,
OPERATION
AND MAINTENANCE
MANUAL
! WARNINGS:
If the InformatIon In thIs manual Is not followed exactly, a fIre or explosIon
may result causIng property damage, personal Injury or loss of lIfe.
PLeASe reAd theSe inStructionS comPLeteLy
Before oPerAting the ecoSmArt™ fire.
e-nrg bioethanol is the
onLy fuel to be used in
this appliance.
Installation, Operation and Maintenance Manual
in order to obtain optimal and safe results from your appliance, we recommend carefully reading the
entire instruction manual.
h
297mm x
l
210mm x
d
8mm
h
[11.7in] x
l
[8.3in] x
d
[0.3in]
Jerry Can with Safety Spout (CARB Regulation compliant)
this 5 Litres [1.25gal] Jerry can has been chosen for its unique safety features. it includes an automatic
stop flow, a fast flow rate, a locking thumb button control, and a self-venting system. The Jerry Can will
allow safe storing/decanting of the e-nrg Bioethanol used in the Burner.
Due to safety regulations the Jerry Can provided with this package comes without fuel.
h
320mm x
l
310mm x
d
195mm
h
[12.6in] x
l
[12.2in] x
d
[7.7in]
e-NRG Fuel Adaptor
Adaptors are used to connect the no Spill Spout to the e-nrg bottle. depending on the thread of the
bottles used in each country the adapter may look different (if available in your country).
Lighting Rod
this long slender piece of stainless steel with a small hook return at the end enables you to safely
adjust the slider position on the Burner at any time. it is also used for the ignition procedure.
h
657mm x
l
28mm x
d
23mm
h
[25.9in] x
l
[1.1in] x
d
[0.9in]
Lighter*
This refillable butane lighter supports the safe ignition of the lighting rod. The length of the lighter further
enhances the management of the lighting process.
* Due to safety regulations the butane lighter provided with this package comes without fuel. Small re-charge cans of butane gas with the necessary
connections can be purchased from your hardware store. Lighter image is indicative only, the model included may vary from time to time.
h
185mm x
l
15mm x
d
15mm
h
[7.3in] x
l
[0.6in] x
d
[0.6in]
Extension Spout (AB3 Only)
An extension spout is included with the AB3 Burner. this is for use with models that have more
restricted access to the filling point so that filling can be done in a safe manner according to the
procedures outlined in the operations manual.
l
500mm x
ø
25mm
l
[19.7in] x
ø
[1in]
Baffles (xL Series) / Efficiency Ring (AB8 Burner)
These efficiency devices are a standard inclusion with the XL Series and AB8 Burners. Baffles (or
rings) are placed over the internal burner vents when cold and not operating and serve to increase the
efficiency of the burner as well as further stabilise the flame of the burner.
XL Series
Efficiency Ring
h
10mm x
l
80mm x
d
10mm
h
5mm x
ø
158mm
h
[0.4in] x
l
[3.1in] x
d
[0.4in]
h
[0.2in] x
ø
[6.2in]
Standard Equipment Received
