13.06.2017 Rev. 01
21
Menu Functions
The menu is divided intothree paths:
INFO
MANUAL
SETTINGS
INFO
Select the INFO path for information about the following:
•
the burner
•
errors that have occurred
•
the software version
•
display of check sums
•
the serial number
•
actuating drive positions (current damper position for each channel)
•
digital inputs/outputs
MANUAL
Select the MANUAL to
•
start and stop the burner manually
•
adjust the internal burner firing-rate
SETTINGS
Select the SETTINGS path for information on, and to make settings for, the following:
•
the password
•
the burner settings (display and settings)
•
the actuator device settings (display)
•
the air/fuel control system
•
the "delete" curve
•
the display settings
Summary of Contents for ECO 8 NG
