TÜV Rheinland Energie und Umwelt GmbH
Luftreinhaltung
Report on the performance testing of the Serinus 30 ambient air quality moni-
toring system manufactured by Ecotech Pty Ltd measuring CO, Report no.:
936/21221977/D_EN
Page 29 of 253
EP_Ecotech_Serinus30_en.docx
On/off switch
The on/off switch is located on the back panel (bottom right facing the rear of the instrument).
Communications
Communication between the analyser and either a data logger, laptop or network can be per-
formed with the following communication connections located on the back panel.
RS232 #1
This port is designed to be used for simple RS232 communication.
RS232 #2
This port is designed to be used for simple RS232 communication, or in multidrop configura-
tion.
USB
This port is used for instrument communication. It allows for quickly downloading data, onsite
diagnostics, maintenance as well as firmware upgrades.
TCP/IP (optional)
This port is best used for remote access and real-time access to instruments when a network
is available to connect with.
External I/O-Port
The analogue/digital port sends and receives analogue/digital signal to/from other devices.
These signals are commonly used to activate gas calibrators of for warning alarms.
Analogue outputs
The analyser is equipped with three analogue outputs; menu selectable as either voltage
output 0-5 VDC, or current output 0-20, 2-20 or 4-20 mA.
Analogue inputs
The analyser is also equipped with three analogue voltage inputs (0-5 VDC) with resolution
of 15 bits plus polarity.
Digital status inputs
The analyser is equipped with 8 logic level inputs (0-5 VDC) for the external control of ze-
ro/span calibration sequences.
Digital status outputs
The analyser is equipped with 8 open collector outputs which will convey instrument status
conditions and warning alarms such as “no flow”, “sample mode”, etc.
Bluetooth
This allows for remote access of the analyser to any Android device with the “Serinus Re-
mote” application installed on it. The application uses Bluetooth to control the analyser, view
parameters, download data and construct real-time graphs.
Summary of Contents for Serinus 30
