![background image](http://html1.mh-extra.com/html/ecotech/serinus-30/serinus-30_instruction-manual_2355554039.webp)
TÜV Rheinland Energie und Umwelt GmbH
Luftreinhaltung
Report on the performance testing of the Serinus 30 ambient air quality moni-
toring system manufactured by Ecotech Pty Ltd measuring CO, Report no.:
936/21221977/D_EN
Page 39 of 253
EP_Ecotech_Serinus30_en.docx
6.1
4.1.4 Set-up times and warm-up times
The set-up times and warm-up times shall be specified in the instruction manual.
6.2
Equipment
The testing of this performance criterion requires the additional provision of a clock.
6.3
Testing
The measuring systems were put into operation in accordance with the specifications provid-
ed by the manufacturer. The set-up times and warm-up times needed were recorded sepa-
rately.
Required structural measures prior to AMS installation such as the setup of a sampling sys-
tem in the analytics room were not assessed here.
6.4
Evaluation
The manual does not provide information on the set-up times. It is evident that this would de-
pend on the specific conditions of the measurement site as well as on the voltage supply
available. As the Serinus 30 measuring system is a compact analyser, the set-up time is
mainly comprised of:
•
Establishing the voltage supply
•
Connecting necessary tubes (sampling, exhaust air)
A set-up time of approx. 0.5 h was determined for various changes in positions in the labora-
tory (i.e. installation/dismounting in the climate chamber) and installation in the field.
When switched on from a completely cold state the instrument requires approx. 60 minutes
until the reading stabilises.
The measuring system has to be mounted at a place where it is protected from changes in
the weather, for instance in an air conditioned measuring container.
6.5
Assessment
Set-up times and warm-up times were determined.
The measuring system may be operated at different measurement sites without undue effort.
The time required for setting up the system is approx. 0.5 h and the warm-up time amounts
to 1–2 h depending on the time required for stabilisation.
Does this comply with the performance criterion? yes
6.6
Detailed presentation of test results
Not applicable in this instance.
Summary of Contents for Serinus 30
