TAP ASSEMBLY
4
Our tap-kit is designed to be
placed on the kitchen countertop
or directly on the edge of the sink.
It is important that the tap is
situated so that waste water runs
into the sink and down the drain.
•
•
•
Escutcheon (
A
)
Rubber seal O-ring (
B
)
Black locating washer (
C
)
Star washer (
D
)
Lock nut (
E
)
Drill a hole (14mm) through the
countertop/sink.
Place seals and washers as shown
on the illustration. The
escutcheon (
A
) and the rubber
seal o-ring (
B
) is to be placed
above the countertop. The black
locating washer (
C
), star washer
(
D
) and the lock nut (
E
) is to be
assembled below the countertop.
The plastic fitting should be
placed on the water intake of the
tap and the water hose should
be pushed into the fitting.
Escutcheon (
A
)
Rubber seal O-ring (
B
)
Black locating washer (
C
)
Star washer (
D
)
Lock nut (
E
)
John Guest
7/16” plastic fitting
ABO
VE THE
C
OUNTER T
OP
BELO
W THE
C
OUNTER T
OP
