15
ECOWATER
S Y S T E
M S
Faceplate Controller, Features/Options
Advanced/Service Menu, continued
Set Model:
The controller is factory set to the model code, which provides
the shortest recharge times and greatest water savings. For operation at
higher salt efficiency levels, the alternate model code selection is required
(see the product specification sheet). Do the following to change to this
code, if desired.
1) Press the (
↑
) or (
↓
) keypads until cursor is next to Set Model and press
SELECT/EXIT (
↵
). Warning screen will display, press (
↑
) to continue.
2) Use the (
↑
) or (
↓
) keypads to change to new model code.
Be sure to set
the correct code, or the EcoWater conditioner will operate on incorrect
timing. NOTE
: If this feature is changed, it will delete all information stored
in the controller (Hardness, Recharge time will have to be reset. All usage
history will be cleared). When you are certain the correct code appears,
press SELECT/EXIT (
↵
) to exit. Warning screen will appear after changing
model code, press (
↑
) to continue. The display will return to the start--up
screens.
MODEL NUMBER
(on rating decal)
Required Code
Alternate Code
ECR 3000R20
R20
E20
ERR 3000R20
R20+
E20+
ECR 3000R30
R30
E30
ECR 3002R30
2R30
2E30
ERR 3002R30
2R30
2E30
ECR 3002R40
2R40
2E40
ECR 3002R50S
2H50
--
ECR 3002R70
2R70
2E70
Restore To Factory Settings:
Press the (
↑
) or (
↓
) keypads until cursor is
next to Restore System and press SELECT/EXIT (
↵
). Default is No. If
set to Yes will restore controller to factory settings.
NOTE
: This will affect
ALL
settings, and controller will go through first time set--up screens again.
Press SELECT/EXIT (
↵
) to exit.
