12
ECOWATER
S Y S T E M S
Programming the Electronic Controller
When the transformer is initially plugged into the electrical
outlet, the model code (EC) and a test number (example:
J1.4), begin to flash in the faceplate display. Then, 12:00
PM and the words “PRESENT TIME" begin to flash.
NOTE:
If “- - - -” shows in the display, press the
UP or
DOWN button until “EC” shows in the display.
Then, press the SELECT button to set, and
change to the flashing “PRESENT TIME" display.
SET TIME OF DAY
If the words “PRESENT TIME" do not show in the display,
press the SELECT button until they do.
1. Press the
UP or
DOWN buttons to set the pres-
ent time. Up moves the display ahead; down sets the
time back. Be sure AM or PM is correct.
NOTE:
Press buttons and quickly release to slowly
advance the display. Hold the buttons down for
fast advance.
2. Press the SELECT button a few times, until the time
appears on the display, but is not flashing.
FIG. 13
FIG. 14
FIG. 12
Display
RECHARGE
button
SELECT
button
DOWN
button
UP
button
