22
DIAGNOSTICS
This feature allows a service technician to check the
operating state of individual components in the condi-
tioner/refiner (e.g. valve position) to troubleshoot prob-
lems.
If an error code is displayed in place of the
rolling status screens, call your dealer for service.
To view the Diagnostics screen:
1
. If an error code is displayed, skip Steps 2-7 and go
directly to Step 8.
2
. To display the Diagnostics screen from any of the
rolling status screens (when an error code is not dis-
played), press the SELECT (
¡
) button to display the
Main menu
.
3
. Press the DOWN (
6
) button to scroll through the
menu options until
Advanced settings
is highlighted.
4
. Press the SELECT (
¡
) button to display the
Advanced settings menu.
5
. Press the DOWN (
6
) button to scroll through the
menu options until
Troubleshooting
is highlighted.
6
. Press the SELECT (
¡
) button to display the
Troubleshooting menu (See Figure 88).
SETUP CHANGES
This feature allows a service technician to repeat the
setup procedure (See Page 8) or restore the condition-
er/refiner’s default operating values.
1
. From any of the rolling status screens, press the
SELECT (
¡
) button to display the
Main menu
.
2
. Press the DOWN (
6
) button to scroll through the
menu options until
Advanced settings
is highlighted.
3
. Press the SELECT (
¡
) button to display the
Advanced settings menu.
4
. Press the DOWN (
6
) button to scroll through the
menu options until
Troubleshooting
is highlighted.
5
. Press the SELECT (
¡
) button to display the
Troubleshooting menu (See Figure 88).
6
. Press the DOWN (
6
) button to scroll through the
menu options until
Setup changes
is highlighted.
7
. Press the SELECT (
¡
) button to display the Setup
changes menu (See Figure 90).
FIG. 88
7
. Press the DOWN (
6
) button to scroll through the
menu options until
Diagnostics
is highlighted.
8
. Press the SELECT (
¡
) button to display the
Diagnostics screen (See Figure 89).
FIG. 89
9
. Press the DOWN (
6
) or UP (
5
) buttons to scroll
through the list. The following items are displayed:
=
Time
(current)
=
Position time
(counts down the time remaining in
the current valve position)
=
Current position
(of the valve: service, fill, brine,
backwash, fast rinse or moving)
=
Requested position
(of the valve)
=
Motor state
(on or off)
=
Valve position switch
(open or closed)
=
Turbine count
(if changing, indicates water flow)
=
Tank light switch
(open or closed)
=
RF module
(detected or not)
=
Error code
(call for service if a number is dis-
played)
continued
10
. When finished viewing the Diagnostics screen,
press the SELECT (
¡
) button. The display will go
back to the Troubleshooting menu.
11
. Press the LEFT (
3
) button three times to return to
the rolling status screens (or error code screen if an
error condition exists).
FIG. 90
8
. If the desired option already has a black dot next to it
(See Figure 90), go to Step 9. Otherwise, press the
DOWN (
6
) or UP (
5
) buttons to scroll to the desired
option, then press SELECT (
¡
) to choose it.
=
Redo setup
allows you to select a different model
code (intended to be used for upgrades or retrofits
of existing conditioner/refiner). Model codes are
listed on Page 39.
=
Restore defaults
will reset all customizable set-
tings to their default values and take you through
the “wizard” screen setup procedure (See Page 8).
=
Cancel
will return to the Troubleshooting menu
(Figure 88).
9
. Press the SELECT (
¡
) button.
ECOWATER
S Y S T E M S
Conditioner/Refiner Operation