4
Conditioner/Refiner Programming
ECOWATER
S Y S T E M S
English
Display
LEFT
Button
RIGHT
Button
UP
Button
DOWN
Button
SELECT
Button
SETUP PROCEDURE
When the unit is plugged in for the first time, you will be
prompted to enter basic operating information.
1
.
LANGUAGE
Press the
DOWN (
6
) or UP (
5
)
buttons to go to the
desired language, then
press SELECT (
¡
)
twice.
NOTE:
You can also skip Wireless Setup and do it after
completing Setup Procedure Steps 6-11. From
Main menu
, go down to
Advanced settings
and select
Wireless setup
.
2
.
WIRELESS SETUP
Choose how you will connect
the softener to your home’s wireless network:
Browser:
You can connect using the browser on your
laptop, tablet or phone. Skip to Step 4.
OR
Pushbutton:
If your wireless router has a
WPS
(Wi-
Fi Protected Setup) or
Push to Con -
nect
button, you can proceed to Step 3.
3
.
PUSHBUTTON (WPS) OPTION
a.
Use SELECT (
¡
) to
choose
Pushbutton
(WPS)
. The softener
display will show “Push
wireless router button”.
b
. Press WPS or Push to
Connect button on
your router and wait to
see if display changes
to “Connected”. If not,
cancel and use the
browser option.
c
. Write down the key
code. You need it to
register your system
on the Eco Water web
site. Proceed to Step
5.
English
Español
Français
Language
Pushbutton (WPS)
Browser
Skip
Wireless setup
Push wireless router
button
Wireless setup
Cancel
Connected!
Key:
abc123
Wireless setup
Continue
NOTE:
If the “Connected” message shows “- - - - - -”
(dashes) instead of a key code, your router may
not be connected to the internet. Verify that the
router’s internet connection works with your
laptop or other device.
4
.
BROWSER OPTION
a
. Press the DOWN (
6
)
button to scroll to
Browser
.
b
. Press SELECT (
¡
)
twice. The softener
display will show “See
connection
instructions”.
c
. On your laptop, tablet
or phone, activate the
view of wireless
networks in range. For
example, on a laptop,
click on the wireless
icon along the lower
right edge of the
screen. On a phone,
go into “Settings” and
look for “Wi-Fi”.
d
. You should see a
network named “H2O-”
followed by 12
characters. Select this
network to connect
your device with it.
e
. Once your device is
connected to the H2O
network, go to your
internet browser and
type in this URL:
192.168.0.1
then click Go or press Enter.
Pushbutton (WPS)
Browser
Skip
Wireless setup
See connection
instructions.
Wireless setup
Cancel
f.
After a screen like the one shown above appears,
select your in-home wireless network and enter the
correct password.
continued
