35
5.2.5 Rainfall
The “Rainfall” setting can be used to control which rainfall value is
displayed. Use the “+” button repeatedly to select from “Rate,” “Daily,”,
“Weekly,” “Monthly,” or “Yearly.”
5.2.6 Graph Time
The “Graph Time” setting controls how far back the historical data graph
looks to present data. Press the “
+
” button repeatedly to select from “12,”,
“24,”, “48,” or “72” hours.
5.2.7 Time Format
The “Time Format” setting controls how time is displayed. Press the “
+
”
button repeatedly to select between “AM h:mm:ss”, “h:mm:ss AM”, and
“h:mm:ss”. The first two will use a 12-hr clock system and display AM or
PM as appropriate either before the time, or after the time. The last format
uses a 24-hr clock system.
5.2.8 Date Format
The “Date Format” setting controls how dates are displayed. Press the “
+
”
button repeatedly to select between “DD-MM-YYYY”, “YYYY-MM-DD”,
and “MM-DD-YYYY”.
5.2.9 Date and Time
The “Date and Time” setting can be used to manually set the time, and it can
be used to set the console’s time zone and whether or not daylight savings
time should be handled automatically. If you are using the units with Wi-Fi
connected, the time setting itself will be handled for you automatically, but
you will have to set the correct time zone and daylight savings time
handling.
Use the “
next
” and “
previous
” buttons to move to the desired input box and
then use the “
+
” and “
-
” keys to change the value.
