7
3.2.1 Install rain gauge filter
There’s a stainless steel filter included in the package.
It’s aimed to stop leaves or bird's dropping to avoid
the obstruction of the cone hole. The installation is as
simple as the below figures show:
Hook the filter hook on the edge of the rain collector
to install the filter(as the figure 2 shows on the left).
Take out the filter hook from the edge to uninstall the
filter(as the figure 2 shows on the right).
Figure 2: Rain gauge filter in/un-installation diagram
Hook the filter hook on the edge
to install
Take out the filter hook from the
edge to uninstall
