31
6.9 Max/Min Mode
6.9.1 Viewing Max/Min Values
To view the max value, press the
MODE
button, and the max values will
be displayed, as shown in Figure 20 (a). To clear the max values, press and
hold the MODE button while the max values are displayed.
To view the low alarm settings, press the
MODE
button again, and the min
values will be displayed, as shown in Figure 20 (b). To clear the min
values, press and hold the MODE button while the min values are
displayed.
To return to normal mode, press the
LIGHT
button.
(a)
(b)
Figure 20
6.9.1.1 Display Wind Chill, Heat Index vs. Dew Point Max/Min Values
While the
max values
are displayed as outlined in Section 6.9.1, press the
TEMP+
button once to view the wind chill, twice to view the dew point,
third to view the heat index and a fourth time to return to outdoor
temperature.
While the
min values
are displayed as outlined in Section 6.9.1, press the
TEMP+
button once to view the wind chill, twice to view the dew point,
third to view the heat index and a fourth time to return to outdoor
temperature.
