Pre-programmed Lighting Schedule Guide
The 0-10V Ramp Timer features four pre-programmed lighting schedules. These schedules are located in memory buttons labeled
TIMER M1,
TIMER M2, TIMER M3, TIMER M4.
To customize any of the settings, please follow the detailed Programming Instructions located on Page 4.
Using the graph and table below, select from any one of the pre-programmed lighting schedules. Once you select a lighting program, simply
press
TIMER M1
,
TIMER M2
,
TIMER M3
or
TIMER M4
and the controller will automatically enter into the selected lighting schedule.
Programming Instructions
Please read the following guides before following the detailed programming
instructions located on the following page.
Programming Feature Guide
The 0-10V Ramp Timer features two independent lighting channels with the following:
- Program on/off times for each channel (dimming down to 10%)
- Adjustable intensity (10-100%) for each channel
- Adjustable ramp up (sunrise) / dim down (sunset) (0-30 minutes)
- Adjustable moonlight duration (0-6 hours)
- On-demand color spectrum adjustment (when using two different color spectrum Cannons)
- On-demand weather simulation including cloud cover, fading moonlight and storm with lightning
- Four memory locations for storing custom lighting schedules (each are pre-programmed by default, see page 3)
0-10V Ramp Timer
Instructions
Page 6 of 10
