Page 7
Operating Instructions ECR 650F – 652F
____
2.2
Warm start
This cash register start up should only be performed when the following key combinations prove unsuccessful:
Following key positions "REG", "X", "Z", "PRG".
1.
CLR
2.
FEED
3.
NS #
A warm start can be performed manually as follows:
1. According to the procedure for a warm start.
2. By pressing the "RESET“ button on the cash register's main board (left of the EPROM).
Procedure for a warm start:
•
Turn the control key to "OFF".
•
Switch off the 220 V mains power supply from the cash register.
•
Press and hold the
FEED
key and, while doing so, switch the 220 V power supply for the cash register
back on.
•
The following appears in the display:
SYSTEM RESET
WARM START
CONTINUE
•
Release
the
FEED
key.
•
Leave the control key at "OFF" and use the arrow keys to select
WARM START
.
•
Press
CASH
. The warm start procedure is completed.
Cancelling
the
WARM START
: Use the arrow keys to move to
CONTINUE
and press the
CASH
key.