background image

32

Using BIOS

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.

Memory Remap Feature

 

(Enabled)

This item allows you to remap the overlapped PCI memory above the total physi-
cal memory if you have a 64 bit OS and 4 GB of RAM.

Dual Monitor Function (Disabled)

This item is a switch to turn on/off the Dual Monitor function. If it is enabled, please
connect the system to two monitors for performing the Dual Monitor function; if
disabled, this function will be turned off.

VGA Share Memory Auto Detect (Auto)

This item lets you allocate a portion of the main memory for the onboard VGA
display application.

Press <Esc> to return to the main menu setting page.

CMOS Setup Utility - Copyright  (C)  1985-2007, American Megatrends, Inc.

                   Advanced Chipset Setup

Memory Timings

Auto

Top of Memory under 4GB

3.25 GB

Memory Remap Feature

Enabled

Dual Monitor Function

Disabled

VGA Share Memory Auto Detect

Auto

Share Memory Value

128MB

Help Item

F10: Save      ESC: Exit

+/-/: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

: Move

mnlk

Memory Timings (Auto)

This item shows the current and target memory performance rates when the system
is undertaking the best performance.

Share Memory Value (128MB)

This item displays the VGA Share Memory Value.

Top of Memory under 4GB (3.25 GB)

This item shows the top of memory under 4GB.

Auto
Manual

        Options

Summary of Contents for GF7050VT-M

































































Reviews: