37
Chapter 3: BIOS Setup Utility
Hardware Monitor Page
This page sets up some parameters for the hardware monitoring
function of this motherboard.
CPU/System Temperature
These items display CPU and system temperature measurement.
FANs & Voltage Measurements
These items indicate cooling fan speeds in RPM and the various
system voltage measurements.
Load Optimal Defaults
If you select this item and press
<Enter>
a dialog box appears. If
you select
[OK]
, and then press
<Enter>
, the Setup Utility loads
a set of fail-safe default values. These default values are not very
demanding and they should allow your system to function with
most kinds of hardware and memory chips.
CMOS SETUP UTILITY – Copyright (C) 1985-2004, American Megatrends, Inc.
Hardware Monitor Setup
-=- System Hardware Monitor-=-
Help Item
Vcore
: 1.280 V
Vdimm
: 2.576 V
Vivdd
: 1.520 V
Vcc5V
: 4.954 V
SB3V
: 3.184 V
VBAT
: 3.184 V
CPU FAN Speed
: 4440 RPM
SYSTEN FAN Speed
: 0 RPM
CPU Temperature
: 72
o
C/161
o
F
SYSTEM Temperature
: 32
o
C/89
o
F
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults