Partner
®
EPg400T User’s
Manual
20
Date format
The default Day-Month-Year date format can be changed to Month-Day-Year.
Time format
The default 24-hour (Military) time format can be changed to the American 12-
hour format.
Schedule alarm
In this subsection you can turn the
Schedule alarm
ON or OFF. If turned on,
which is the default setting, the
Schedule alarm
will go off at the date and time of
the
Schedule
record, producing an audible beep.
Daily alarm
y
Enter the
Daily alarm
subsection.
9
The default values are midnight, 00:00, and OFF.
Use
u
,
t
to turn the alarm ON/OFF
y
Press ENTER to save changes.
If turned on, the
Daily alarm
produces a signal at the set time.
y
Press any key to interrupt the
Daily alarm
beep (otherwise, the beep will
continue for 30 seconds).
Memory check
Instantly check the free memory status with this
Setup
option.
y
Enter the
Memory check
subsection to check the remaining free memory.
Data deletion
The
Data deletion
subsection gives you the ability to free up memory resources
by deleting records much faster than removing them one by one.
Set password
With no password set (default) all functions of the EPg400T are freely accessible.
After a password has been set, the following sections may be locked against
unauthorized access:
Telephones
PC Communication
Data deletion
Set password
Schedule
User’s dictionaries
Security mode
To gain access to any of these sections in the locked mode, a valid password
must be provided.
y
Enter the
Set password
subsection.
