[
ECTIVE
®
POWER INVERTER – MI-/TMI-SERIES
]
40
Commissioning of the inverter
1 . Make sure that the on/off button of the inverter is switched “off” . If the input
voltage is provided by a supply unit, switch it off as well .
2 . Connect the inverter to the DC voltage source with the delivered cables .
3 . Connect the delivered power cable to the inverter .
4 . Switch on the inverter .
5 . only for TMI-Series: wait approx . 12 sec . until the inverter turns on .
6 . Switch on all of the electronic devices one by one .
☝
Please note!
Sparking!
The connection process to the input DC voltage source leads to sparking because of
the charging of the internal capacitors .