26
27
ECTIVE DC Series
ECTIVE DC Series
Using the Refill Packs
Use of the battery results in water loss,
which is a natural process that occurs
during degassing At high temperatures and
with overcharging, this will process occur
faster
You can use the included refill packs to
top up the battery and thus extend its life
Proceed as follows:
1 Lift the top cover of the battery with a
thin metal object and then remove it
2 Remove the six refill packs and remove
the six valve caps on the top of the
battery
3 Using the supplied pointed plastic
stick, pierce a hole in the foil seal of
the refill pack Insert one end of the
injection tube into the refill pack and
then insert the other end into one of
the open safety valves
4 Gently squeeze the fluid from the
refill pack into the battery After
refilling, close the safety valve with
the valve cap
5 Proceed the same way with the five
remaining refill packs, using one pack
per valve openings of the battery
6 After refilling, make sure that the top
cover of the battery is firmly in place
7 After filling, discard the tube and
empty refill packs
Caution: The fluid in the refill packs is non-
toxic but corrosive Please note that when
the battery’s top cover is lifted, the rubber
cap of the outlet valve may pop up Close
the outlet valve with the rubber cap again
after filling
1
2
3
5
4
6
+
