Unbuckle Harness
Press red button.
Pull buckle tongues out.
Place harness straps out
of the way.
For small infants, skip to
step c.
Insert the buckle’s metal
retainer through the
desired slot.
Make sure that the buckle
is
facing out.
Place Child in Child
Restraint
Place the child’s bottom
and back flat against the
restraint.
This will allow the harness
straps to be properly
tightened.
Pull up on buckle strap to
make sure it is secured.
The buckle must not
pull out.
Check Buckle
Position
Determine which of the
available buckle positions
will provide a snug fit for
your child.
To Change Buckle
Position
Remove child.
From under the seat,
rotate the metal retainer
then insert retainer up
through the carrier and
pad.
Buckle Placement for
Small Infants
Choose the slot closest to
the back of the restraint.
Push metal retainer
through the pad and
carrier.
Make sure that the buckle
is
facing out.
4.
a.
5.
b.
6.
7.
c.
17
18
C. Basic Use
Failure to reinstall the harness system
correctly can result in serious injury or
death.
continued on next page.
