background image

54

53

 

1.

 If the child restraint buckle or harness release 

lever sticks or you cannot get the straps tight enough 
around child: 

 

DO NOT LUBRICATE. Check around lever 

and retractor for dropped food, sticky spilled drinks, dirt, 
leaves, etc. Clean with warm water and/or remove object with 
tweezers. If you cannot get the harness to adjust and remain 
tight with the buckle securely locked, do not use the child 
restraint.

2. 

If your harness twists:

 Straighten the harness each 

time you put your child in the child restraint to help prevent 
twisting.  Lock the buckle and tighten harness and it will be 
ready for next use.

3

 

Locate a Child Safety Seat Inspection Station for 

hands on training on how to use your child restraint: 

Visit your local Child Passenger Inspection Station or go to

 

http://www.nhtsa.dot.gov/cps/cpsfitting/index.cfm to find 
your closest station.

 Troubleshooting

Complete the form below. Your model number with color code and 
manufacturer date code MUST be included on the form to ensure 
proper replacement parts. Your model number with color code and 
the date code can be found on a sticker on the side of child restraint.  
Payment in U.S. dollars must accompany your order. Choose parts 
needed from the list on the next page.
  
Return the form with payment to:

Dorel Juvenile Group, Inc.
Consumer Relations Department
P.O. Box 2609
Columbus, IN 47202-2609

Fax orders to: 1-800-207-8182

Please make money orders payable to Dorel Juvenile Group, Inc.  Fill 
in the area below to charge to Visa or Mastercard.  We do not accept 
personal checks or Discover Card.  All outside of U.S. and Canada 
MUST use credit card.

Ship To (Please Print): _________________________________

Name: _____________________________________________

Address: ___________________________________________

City: ______________________________________________

State/Province: __________________________ Zip _________

Telephone: _________________________________________

Email Address:  ______________________________________

We

 MUST

 have this information 

to process your order:

Model Number (8 to 9 characters):___________________

Manufacture Date (mm/dd/yyyy):____________________ 

 Replacement Parts Order Form

Summary of Contents for surefit






























Reviews: