24 | eddyfi.com
When using an array probe:
1.
During acquisition: next position to be
acquired on channel 1’s X axis.
During analysis: cursor position of
selected point on the X axis, regardless
of the channel used to capture the
point.
2.
During acquisition: next position to be
acquired on channel 1’s Y axis.
During analysis: cursor position of
selected point on the Y axis, regardless
of the channel used to capture the
point.
3.
Saturation, over speed, and bad data
fitting warnings. Clicking
Warnings
opens the
Warnings Information
dialog
box.
4.
During acquisition: minimum wall
thickness (in percentage) on all array
channels. The channel where the
minimum is measured is indicated at the
bottom.
During analysis: wall thickness (in
percentage) at the cursor position,
regardless of the channel used to
capture the point.
5.
During acquisition: minimum wall
thickness (in measurement units) on all
array channels.
The channel where the minimum is
measured is indicated at the bottom.
During analysis: wall thickness (in
measurement units) at the cursor
position, regardless of the channel used
to capture the point.
When using a single-element probe:
1.
During acquisition next position to be
acquired on the X axis. During analysis: cursor
position on the X axis
2.
During acquisition: next position to be
acquired on the Y axis. During analysis: cursor
position on the Y axis
3.
Saturation overspeed, bad data fitting
warnings. Clicking
Warnings
opens the
Warnings Information
dialog box.
4.
Wall thickness (in measurement unit) at the
cursor position
5.
Wall thickness (in percentage) at the cursor
position
Summary of Contents for LYFT
