6
1.
General Precautions
The following precautions are to be observed at all times when using the LYNCS™ scanner. Please
ensure that you review them before utilizing the system:
•
Keep this document in a safe place for future reference.
•
Carefully follow the installation and operation procedures detailed herein.
•
Observe all warnings, notes and instructions as marked on the packaging, the scanner, and
detailed in the user manual.
•
When transporting, it is your responsibility to follow all safety precautions as dictated by the
relevant local governing bodies.
•
The equipment must not be used for purposes other than those intended. Eddyfi assumes no
responsibility for any damage resulting from such improper usage.
•
Do not use substitute parts or perform unauthorized modifications to the system.
•
If the system does not operate normally, please contact Eddyfi for assistance.
1.1.
Safety Precautions
During operation of the LYNCS™ system please observe the safety warning and precautions.
Magnetic Field
The wheels of the LYNCS™ scanner contain magnets that produce an extremely strong magnetic
field which may cause failure or permanent damage to items such as watches, memory devices,
CRT monitors, and medical or other electronics devices.
Any form of credit card, security pass, computer or programmed equipment may be permanently
affected if exposed to the magnetic field of the system.
Pacemakers or other Medical Devices and Mechanical Implants
Powerful magnets may interfere with medical electronics such as pacemakers, defibrillators, or
other internal and external medical devices. The interference can be severe and cause malfunctions.
Individuals wearing such devices should not handle strong magnets. If any user has any type of
electronic, mechanical, implanted, or external medical device, they should consult a physician and
the manufacturer of the medical device to determine its susceptibility to static magnetic fields prior
to allowing them to handle the LYNCS™ system. All magnetic products should be kept at a safe
distance from individuals with such devices.
Finger Trap
Due to the powerful magnets involved care must always be taken when handling and using the
LYNCS™ system, especially when deploying and removing the scanner from the inspection surface
as the system will exhibit a strong attractive force and present a finger trap.
Loose ferrous material such as tools, metal objects or magnets will be attracted to the systems
magnetic wheels and may cause injury as they move towards them. Always ensure to work in a
clean area, carefully follow handling instructions and be vigilant.
Laser
The LYNCS™ system utilizes a Class 1 laser for scanning guidance. While laser protection eyewear is
not normally necessary, do not deliberately look or stare into the laser beam. Avoid accidental
exposure to eyes. Do not aim at aircraft or vehicles, it is unsafe and illegal.
