1. Introduction
Thank you for purchasing our EDD-RP-WBIF1009 Cube light. Please read
these instructions carefully before operating to avoid any possible damage
and accidents caused by misuse.
The Cube light has a hydrodynamic aluminum shell. Five integrated, high-
brightness LED lights (containing red, green, blue, amber, white) are used
to create a wide spectrum of colors. Each red, green, blue, amber and
white color can be independently mixed, dimmed, faded and so on. It
draws low power and is low weight, and is remote controllable. The DMX
controls include dimming, fade, strobe, gradual change and more. The unit
is compatible with the standard DMX 512 signal for external DMX control.
Practical uses of the product include dance halls, stage backgrounds,
hotels and drapery uplighting.
Packing List
- EDD-RP-WBIF1009 Cube light
- Power cable
- Remote control
- User manual
2. Safety Information
- Please consult skilled service technicians for any repairs required
- Always disconnect from the power source before setting up, moving and
servicing
- Avoid direct eye contact to the light when in operation
- Make sure the power supply voltage is compatible with this light
- Before installation, please check the light’s fasteners and mechanical
structure is in good condition and not damaged
- The light is designed for indoor use, below 40 degrees celsius
- The fixture may be mounted in any position provided there is adequate
room for ventilation. Make sure there are no flammable and explosive
items within 0.5 meters.
- Please ensure the ground is always connected
1-800-914-3538
