background image

WWW.EDELBROCK.CO

M

©2007 Edelbrock Corporation
Brochure #63-70216

Page 2 of 16

Catalog #70216

Rev. 5/07 - DC/mc

Thank You….
…for purchasing an Edelbrock Nitrous Oxide Injection System.

Nitrous Oxide injection is one of the most exciting performance enhancements, for the dollar invested, on the market today. With the use
of nitrous oxide come some important safety considerations. This manual has been written to help you during the installation and use of
your Edelbrock Nitrous System. Please read it completely before you install and use your system. Please pay close attention to the safety
information at the beginning of each section. The information contained there specifically pertains to each of the components and
installation methodologies within the section.

Please take the time to read and understand the following….

By installing your Edelbrock Nitrous System, you indicate you have read this document and you agree with the terms stated below:

It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with the Edelbrock
Nitrous Systems. It is also the responsibility of the purchaser to determine the compatibility of the product with the vehicle or the device
on which the purchaser intends to install it.

Edelbrock Corporation assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper operation,
lack of responsible care, or all previously-stated reasons resulting from incompatibility with other manufacturer’s products and/or
systems.

Edelbrock Corporation neither recommends nor condones the use of products manufactured or sold by Edelbrock Corporation for use on
vehicles, which may be driven on public roads or highways, and assumes no responsibility for damages incurred by such use.

Edelbrock Corporation assumes no responsibility for damages incurred by the use of products manufactured or sold by Edelbrock
Corporation on vehicles used for competition or racing.

Edelbrock General Warranty

It is the constant endeavor of Edelbrock Corporation to give our customers the highest quality products obtainable. Edelbrock warrants
each new product, except Performer Series Carburetors, Race Division Parts, Tubular Exhaust Systems, RPM Series Mufflers, Cat-Back
Systems and Performer IAS Shock Absorbers which are warranted separately, to be free from defects in both workmanship and material
for a period of one (1) year from the date of purchase, provided that the product is properly installed, subjected to normal use and service
and that the product is not modified or changed in any way, negligence by customer or installer or used for racing or competition
purposes.

Our warranty service and repair facility is located at 2700 California Street, Torrance, California 90503. Customers who believe they have
a defective product should either return it to the dealer from which it was purchased or ship it directly to Edelbrock along with proof of
purchase and a complete description of the problem. The product must be returned freight pre-paid. If a thorough inspection of the
product by the factory indicates defects in workmanship or material, our sole obligation shall be to repair or replace the product. Warranty
covers only the product itself and not the cost of installation or removal.

Edelbrock Corporation shall not be liable for any and all consequential damages occasioned by the breach of any written
or implied warranty pertaining to this sale in excess of the purchase price of the product sold.

If you have any questions regarding a product or installation, please contact our Technical Department, toll free 
at 1-800-416-8628 from 7:00am to 5:00pm PST, Monday through Friday.

Thank you again for choosing Edelbrock Nitrous Systems.

Summary of Contents for 70216

















Reviews: