Follow steps 1-4 from the Basic Set-Up. Then, connect the product adapter to the base of the Misting Tower.
Attach the lockable quick connect to the end of the hose and simply snap in the hose to the Misting Tower.
Set-Up with Quick Connect
To extend, simply remove the end cap and attach another hose and connect another Misting Tower.
Cleaning and Maintenance
If you are not using a water filter and the Misting Tower has low water pressure, you may need to clean the misting nozzles. To
clean, simply use your hand to unscrew the red nozzle caps. Carefully rinse all parts with a gentle water flow. Be mindful of all
parts when cleaning. Cleaning should be done on a workbench to prevent losing parts.
The Quick Connect Adapter (2 pcs) and Hose
Connector with Water Stop (1 pc) simplify your
watering experience. Simply attach the connector
at the end of your hose. Then, connect the
adapters to your watering tools. Interchange
various tools in a snap without turning off the
water as the adapter will stop the water flow. No
more kinking or hose twisting as the adapter
allows the hose to swivel 360 degrees.
A
C
A B C D
B
D
Quick and easy connections to 5/8-inch and
1/2-inch garden hoses, sprinklers, nozzles, and/or
any other garden watering tools
UNLOCK
LOCK
UNLOCK
LOCK
Twist-and-lock
mechanism prevents
accidental disconnection
CAUTION
-For outdoor use with cold water only
-Do not spray near electrical connections
-When not in use, rinse the tool with water to remove most of the dirt, dry your tool, and store indoors
This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer.
For more information go to
www.P65Warnings.ca.gov
LOCK
WATER
+
