background image

97063-EDAMZ

• 

You can place your sprinklers and make custom-length garden hoses to suit your watering needs. 

• 

You "permanently" place the sprinklers and hoses in areas that are out of sight and set them on timers. 

• 

Once the system is in place and set on the timer, you can leave it and forget about it. 

• 

The system is completely modular and can grow with your needs. 

• 

You can even add the extensions where needed for added height.

• 

The best part is, if you ever move, you can take it all with you and use it at your next place. 

• 

How much of your yard do you want to water? Depending on your watering needs, some plants may 

  require more water than others.

• 

Where can you put a sprinkler to reach the maximum amount of area, yet remain out of sight while taking 

  care of your plants?

• 

Where are your outdoor faucets located, and if needed, can you add another one? 

• 

Sometimes, the outdoor faucets are not nearby.

• 

Where will hoses need to be run, and can they be hidden in flower beds, under a deck, etc...? Some will 

  place the hoses in the ground to hide them and also to protect them from getting damaged.

Attach the hose to the Tap Flow Connector. By inserting the hose into the connector, tighten the connector, then you can connect to your faucet / tap or 
watering timer. 
Position the spikes at the locations you want to have them. As the water coverage for each spike is 5m in diameter, 

The best distance between sprinklers 

will be 3 - 13 ft (1 - 4m).

 A maximum of 4 spikes in one water line will work well with 50 PSI water pressure.

FLEX-DESIGN SPRINKLER SET

Step 1

Step 2

Cut your hose to match the distances 
between each spike location. To prevent 
leaks, please cut your hose properly 
squared. Attach the hoses to the spike 
by loosening the side hose connectors. 
Insert the hose into the connector, then 
tighten the connector, creating a tight 
fit. Put the STOP end cap at the end or 
remove the STOP end cap to add 
additional units.

Step 3

The idea is to place the Flex-Design Sprinklers Set in "permanent" locations. 
Ask yourself the following questions:

Best Distance 3-13ft (1-4m)

Reviews: