-3-
Installation
1. Wash all parts which come into contact with food.
2. Assemble blender as shown below in steps 1 through 5.
Scope of application
The Whole Food Juicer/Blender can make soups, nut butters, mixed drinks, desserts,
sauces, dips and pie fiillings, plus grind grain for flour, chop veggies, mix batter and more.
Work Time
-4-
The machine has O position, I position, II position and P button switch (O is stop, I Low,
II High, P point mobility ). Select point mobility and High position for chopping, mincing,
and grinding. Process for 10 seconds and then stop for 5 seconds. Turn on the blender
after 1 minute rest when processing for one minute.
Select point mobility or High position for stirring vegetables and fruit. Select Low position
for stirring eggs. Select High position for juice extracting.
Please stop for 15 minutes when the above jobs are done three times consecutively. Turn
on the blender again after motor has cooled, to prolong the service life of the blender.
Stir
a. Wash all parts which come into contact with food.
b. Confirm your power plug is consistent with this machine.
c. The machine should be placed on a hard level surface, so as to avoid accidents.
d. Put the raw materials into the mixing jar adding suitable amount of water, (not more
than the highest scale line), cover with lid and filling cup.
e. Plug power cord in, open the knob switch. Blender start running.
After 40 seconds to 60
seconds, processed foods can be crushed or dissolved.
.
.
Cleaning
1. Close the blender and unplug the power plug.
2. All removable parts must be removed before cleaning.
Quick clean for mixing jar
1. Fill the blending jar half full of water. Add a few drops of dishwashing liquid. Close
blender lid.
2. Turn control knob switch to ON, then press the P button several times in a row.
3. Remove the blending jar and empty it. Rinse out the jar.
Note: please don’t use steel wool, corrosive cleaning solvents or corrosive solutions
to clean.
1
2
1
2
3
2
1
4
5
