Edenwood BDS 22, Instruction Manual

11

7.  Basic Operation

7.1  Standby/ON

When you first connect the main unit to the mains 

socket, the main unit will be in Standby mode.
• Press 

and hold

 the   button 

for 3 seconds 

on the unit or press the   button on the 
remote control to switch the unit ON.

• Press 

and hold

 the   button 

for 3 seconds 

on the unit or press the   button on the 
remote control again to switch the unit back 

to STANDBY mode. 

• 

Disconnect the mains plug from the mains 

socket if you want to switch the unit OFF 

completely.

7.2  Automatic Power Off Function

The unit automatically turns to 

Standby 

mode 

after about 15 minutes if the TV or the external 

unit is disconnected, switched off or the volume is 

too close to mute.
•  

To switch the unit off completely, remove the 

mains plug from the mains socket.

•  

Please turn the unit off completely to save 

energy when not in use.

7.3  Select Modes

Press the 

(SOURCE)

button on the unit or on 

the remote control to select the

 AUX,

Bluetooth, 

OPTICAL, HDMI ARC

 and 

USB

 mode. The selected 

mode will show on the display.

7.4  Adjust the Bass Level

•  

Press the 

BASS 

+

/

－ 

buttons on the remote 

control to adjust bass level.   

(bass+3 ~ bass–3)

7.5  Adjust the Brightness

•  

When no operation for 10 seconds, the 

brightness of the screen will antomatically 

dim the brightness. When opreated again, 

the brightest level will be antomatically 

restored.

7.6  Select Equalizer (EQ) Effect

Press the

 EQ 

button on the remote control to 

select your desired preset equalizer:  

NEWS /  MOVIE / MUSIC

.

7.7  Adjust the Volume

•  

Press the 

VOL 

+

/

－

 buttons on the unit or on 

the remote control to adjust the volume.

•  

If you wish to turn the sound off, press the   
(MUTE)

button on the remote control. Press 

the   (MUTE)

button again or press the 

VOL 

+

/

－

 buttons on the unit or on the remote 

control to resume normal listening.

8.  AUX / OPTICAL / HDMI ARC 

Operation

1 

Ensure that the unit is connected to the TV or 

audio device.

2 

Press the 

(SOURCE) button on the unit 

or on the remote control to select the 

AUX, 

OPTICAL, HDMI ARC

 mode. The selected 

mode will show on the display.

3 

Operate your audio device directly for 

playback features.

4 

Press the 

VOL 

+

/

－

 button to adjust the 

volume to your desired level.

Tip: 

The unit may not be able to decode all digital 

audio formats from the input source. In this 

case, the unit will mute. This is NOT a defect. 

Ensure that the audio setting of the input 

source (e.g. TV, game console, DVD player, 

etc.) is set to 

PCM

 (Refer to the user manual 

of the input source device for its audio 

setting details) with HDMI / OPTICAL input.