310003_04 | 06.2019
Eder Forestrytools
10
EN
Function
The motorised handheld device consists of a drive motor and an
attachment in the ordered version. With the different versions of the
attachment you can achieve different contours when working the
wood. The individual attachments can be exchanged for another
attachment in a few easy steps.
EDER Bark Stripper Set ESG-A56
Field of application:
For peeling logs of any diameter.
The design of the cylinder results in high cutting performance with
minimum effort.
Tungsten carbide pins placed directly behind the knives are designed
in such a way that the distance between the knives and the log is
maintained automatically and independently of the bark thickness
over the entire length of the log. Knots and thin branches are easily
and cleanly milled off.
The cylinder is straight and mills a flat surface similar to that of the
peeling knife. This allows you to use the device at an angle or
crosswise when working on the side of the trunk and when peeling
root knots.
For the processing of robinia wood we recommend the use
of the contour planer EKH.
EDER Flat Planer Set EPH-A56
Field of application:
For planing flat or round wood surfaces from
30 cm diameter.
The design of the cylinder results in high cutting performance with
minimum effort.
The knives mounted on the rotating cylinder are continuously
adjustable, allowing you to set both the cutting radius and the cutting
depth according to the desired chip thickness.
On the cylinder there are four knives distributed on two levels, which
produce a smooth surface without vibrations.
i
