7
EDER Power Climber
270900_00 | 09.2021
The EDER Power Climber EPC 130 is designed for the transport of one
user with equipment and materials if necessary. The EDER Power
Climber EPC 130 may only be controlled by one person. Total load on
the EDER Power Climber EPC 130 must not exceed 130kg.
The EDER Power Climber EPC 240 is designed for the transport of one
user with equipment and materials if necessary, as well as for carrying
one additional person, e.g. in rescue operations. The EDER Power
Climber EPC 240 may only be controlled by one person. Total load on
the EDER Power Climber EPC 240 must not exceed 240kg.
When used for transporting persons, with the device and the operator at
a fixed point above the person to be transported, there must be a secure
and permanent visual and voice contact between the person to be
transported and the operator.
Intended use also implies that you have read and understood this
manual in its entirety and in particular the chapter "Safety instructions".
Improper use
Any use not in accordance with the intended use is not permitted. The
following is considered improper use:
•
removing or modifying safety devices,
•
using the EDER Power Climber in any other way than described in
the chapter "Intended use",
•
performing cleaning, maintenance and repair measures other than
those listed in the chapters Cleaning and Maintenance,
•
using the attachment under operating conditions that differ from those
described in this manual.
•
The EDER Power Climber is not suitable for EEX protected areas. If
the device is nevertheless to be used in an EEX protected area, a
risk assessment must be carried out by the operator.
If the device is not used as intended, all warranty claims will become
void.
The manufacturer is not liable for damage to the device and for personal
injury resulting from improper use.
Qualification of the personnel
The EDER Power Climber may only be used by persons
•
who have familiarised themselves with the device and the
associated dangers on the basis of these instructions.
